Very aggressive polyester-based abrasive tool with two layers of highly resistant resin on the grit. Suitable for low temperature grinding of titanium and high tensile special materials. The top layer is coated with a specially formulated chemical additive that effectively prevents the heat generation during machining.
Grain:
Thanks to the microcrystalline structure of the self-sharpening ceramic grains, the tool can work under high operating pressure. High material removal is achieved for high tensile strength and special materials. Applicable for: grinding wrought iron, steel, titanium, Inconel, other high hardness or toughness alloys and castings.
Use:
- Belt sanding machine
| width | Grain sizes | Type of connection | ||||||||||||||||||
| (mm) | 500 | 400 | 320 | 280 | 240 | 220 | 180 | 150 | 120 | 100 | 80 | 60 | 50 | 40 | 36 | 24 | GS | GM | TT | ZZ |
| 20 | • | • | • | • | • | • | • | • | ||||||||||||
| 25 | • | • | • | • | • | • | • | • | ||||||||||||
| 30 | • | • | • | • | • | • | • | • | ||||||||||||
| 35 | • | • | • | • | • | • | • | • | ||||||||||||
| 40 | • | • | • | • | • | • | • | • | ||||||||||||
| 45 | • | • | • | • | • | • | • | • | ||||||||||||
| 50 | • | • | • | • | • | • | • | • | • | |||||||||||
| 60 | • | • | • | • | • | • | • | • | • | |||||||||||
| 70 | • | • | • | • | • | • | • | • | • | |||||||||||
| 75 | • | • | • | • | • | • | • | • | • | |||||||||||
| 80 | • | • | • | • | • | • | • | • | • | |||||||||||
| 90 | • | • | • | • | • | • | • | • | • | |||||||||||
| 100 | • | • | • | • | • | • | • | • | • | |||||||||||
| 120 | • | • | • | • | • | • | • | • | • | |||||||||||
| 140 | • | • | • | • | • | • | • | • | • | |||||||||||
| 150 | • | • | • | • | • | • | • | • | • | |||||||||||
| 180 | • | • | • | • | • | • | • | • | • | |||||||||||
| 200 | • | • | • | • | • | • | • | • | • | |||||||||||
| 240 | • | • | • | • | • | • | • | • | • | |||||||||||
| 300 | • | • | • | • | • | • | • | • | • | |||||||||||
| 400 | • | • | • | • | • | • | • | • | ||||||||||||
| 500 | • | • | • | • | • | • | • | • | ||||||||||||
| 650 | • | • | • | • | • | • | • | • | ||||||||||||
| 700 | • | • | • | • | • | • | • | • | ||||||||||||
| 800 | • | • | • | • | • | • | • | • | ||||||||||||
| 900 | • | • | • | • | • | • | • | • | ||||||||||||
| 950 | • | • | • | • | • | • | • | • | ||||||||||||
| 1000 | • | • | • | • | • | • | • | • | ||||||||||||
| 1050 | • | • | • | • | • | • | • | • | ||||||||||||
| 1100 | • | • | • | • | • | • | • | • | ||||||||||||
| 1150 | • | • | • | • | • | • | • | • | ||||||||||||
| 1200 | • | • | • | • | • | • | • | • | ||||||||||||
| 1250 | • | • | • | • | • | • | • | • | ||||||||||||
| 1300 | • | • | • | • | • | • | • | • | ||||||||||||
| 1400 | • | • | • | • | • | • | • | • | ||||||||||||
For efficient machining of individual materials grades, ask our technology consultants or technical sales representatives for an offer.
