Thanks to the inserts embedded in the substrate and glued on the back, it is characterized by extremely high performance and outstandingly high material removal. Its main characteristic is the radial holes in the plastic backing, through which the sanding cloth inserts are inserted. The special design allows for a larger amount of abrasive material on the tool. The inserts are placed in a staggered manner, highlighting each other, allowing the heat generated during machining to escape between the tool and the workpiece. Thanks to this cooling property, the product is able to achieve greater performance and long-term work without burning the surface of the workpiece. When used, the inserts rise slightly due to centrifugal forces, increasing vibration absorption and allowing for finer machining with less pressure and longer tool life. Thanks to its eye variations, it is a very versatile product. It is especially recommended for grinding carbon steel, stainless steel and aluminium.
Design: straight
Grain:
- Alumina grain: thanks to its favorable mechanical properties, it can be used efficiently for machining carbon steel.
- Zirconium corundum grain: regular, crystalline, hard and shape-holding, so it can achieve high material removal with high performance. Very aggressive grit type, therefore used for rough grinding of hard materials.
- Silicon carbide grains: extremely sharp and hard grains. Ideal for sanding non-ferrous metals, plastics, marble, glass and stone.
Use:
- manual angle grinders
Shape EGYENES
aluminium oxide
DxB

| Dimensions | Grain sizes | |||||||||||||||
| Notation | D | B | Max RPM | Cs.e | 320 | 220 | 180 | 150 | 120 | 100 | 80 | 60 | 50 | 40 | 36 | 24 |
| 43A | 110 | 22 | 11000 | 20 | • | • | • | • | • | • | • | • | • | • | ||
| (*)126A | 165 | 22 | 6800 | 10 | • | • | • | • | • | • | • | • | ||||
Shape EGYENES
CIRKON KORUND
DxB

| Dimensions | Grain sizes | |||||||||||||||
| Notation | D | B | Max RPM | Cs.e | 320 | 220 | 180 | 150 | 120 | 100 | 80 | 60 | 50 | 40 | 36 | 24 |
| 61Z | 110 | 22 | 11000 | 20 | • | • | • | • | • | • | • | |||||
| (*)114Z | 165 | 22 | 6800 | 10 | • | • | • | • | • | |||||||
Shape EGYENES
silicon carbide
DxB

| Dimensions | Grain sizes | |||||||||||||||
| Notation | D | B | Max RPM | Cs.e | 320 | 220 | 180 | 150 | 120 | 100 | 80 | 60 | 50 | 40 | 36 | 24 |
| 43CS | 110 | 22 | 11000 | 20 | • | • | • | • | • | |||||||
| (*)126C | 165 | 22 | 6800 | 10 | • | • | • | • | • | • | ||||||
*For safety reasons, the support disc P165 is required for these discs!
For efficient machining of individual materials grades, ask our technology consultants or technical sales representatives for an offer.
