Our super-abrasive, conical pot wheels are suitable for roughing and finishing grinding of hard-to-reach parts due to their geometry. It is typically used for grinding and sharpening tools, drills, but also used in all circumstances where the simultaneous work of the tool shell and face is required. Thanks to our wide range of grains and binders, our tools are optimized for a precisely defined task.
Available base bodies: ceramic, aluminium, steel
Available geometries: 11A2, 11V9, 12A2/1, 12A2/20°, 12A2/45°, 12A9, 12C9/20°, 12C9/45°, 12V2, 12V5/V°, 12V9, 12V9/25°, 15V9/Vz°
Shape 11A2
Tapered pot-shaped superabrasives
DxWxXxH

| Dimensions | Type of binding | |||||||||
| D | W | X | H | T1 | E | Bakelite | Ceramics | Metal | Hybrid | Galvan |
| 50 | 3/4/5 | 2/3/4 | * | 13 | 8 | • | ||||
| 55 | 10 | 2/3/4 | * | 15 | 10 | • | ||||
| 63 | 3/5/10 | 2/3/4 | * | 15 | 10 | • | ||||
| 75 | 3/4/5/6/8/10/15 | 2/3/4/5 | * | 18 | 10 | • | ||||
| 100 | 3/4/5/6/8/10/12,5/15/20 | 2/3/4/5 | * | 22 | 10 | • | ||||
| 100 | 6/8/10/12,5/15 | 4-6 | 25 | 22 | 10 | • | ||||
| 100 | 6/8/10/12,5/15/20 | 4-6 | * | 22 | 10 | • | ||||
| 125 | 3/4/5/6/8/10/12,5/15/20 | 2/3/4/5/6 | * | 23 | 10 | • | ||||
| 125 | 6/8/10/12,5/15 | 4-6 | 25 | 22 | 10 | • | ||||
| 125 | 6/8/10/12,5/15/20 | 4-6 | * | 23 | 10 | • | ||||
| 150 | 3/4/5/6/8/10/12,5/15/20/25 | 2/3/4/5/6 | * | 23 | 10 | • | ||||
| 150 | 6/8/10/12,5/15 | 4-6 | 25/40 | 22 | 10 | • | ||||
| 150 | 6/8/10/12,5/15/20/25 | 4-6 | * | 23 | 10 | • | ||||
| 175 | 3/4/5/6/8/10/12,5/15/20/25 | 2/3/4/5/6 | * | 23 | 12 | • | ||||
| 175 | 6/8/10/12,5/15/20/25 | 4-6 | * | 23 | 12 | • | ||||
| 200 | 4/5/6/8/10/12/15/20/25 | 2/3/4/5/6 | * | 23 | 12 | • | ||||
| 200 | 6/8/10/12/15/20/25 | 4-6 | * | 23 | 12 | • | ||||
| 220 | 4/10/15/20 | 2/3/4/5/6 | * | 25 | 12 | • | ||||
| 220 | 10/15/20 | 4-6 | * | 25 | 12 | • | ||||
| 250 | 5/6/8/10/12/15/25 | 2/3/4/5/6 | * | 25 | 15 | • | ||||
| 250 | 8/10/12/15/25 | 4-6 | * | 25 | 15 | • | ||||
* The parts marked with "*" are determined by individual requirements, prior consultation.
Standard abrasive layer thicknesses (X): 2mm / 3mm / 4mm / 5mm / 6mm.
Standard bore diameters (H): 25mm / 40mm.
Shape 11V9
Tapered pot-shaped superabrasives
DxXxUxH

| Dimensions | Type of binding | |||||||||
| D | X | U | H | T | E | Bakelite | Ceramics | Metal | Hybrid | Galvan |
| 40 | 1,5/2/3 | 6 | * | 18 | 8 | • | • | |||
| 50 | 1,5/2/3 | 6 | * | 20 | 8 | • | • | |||
| 75 | 1,5/2/3 | 6/10 | * | 30 | 10 | • | • | |||
| 75 | 2/3/5 | 6/10 | * | 30 | 12 | • | • | • | ||
| 90 | 1,5/2/3 | 6/10 | * | 35 | 10 | • | • | |||
| 100 | 1,5/2/3 | 6/10 | * | 35 | 10 | • | • | |||
| 100 | 2/3/5 | 6/10 | * | 35 | 12 | • | • | • | ||
| 125 | 1,5/2/3 | 6/10 | * | 40 | 10 | • | • | |||
| 125 | 2/3/5 | 6/10 | * | 35 | 12 | • | • | • | ||
| 150 | 1,5/2/3 | 6/10 | * | 50 | 10 | • | • | |||
* The parts marked with "*" are determined by individual requirements, prior consultation.
Standard widths (U): 6mm / 10mm.
Standard abrasive layer thicknesses (X): 1,5mm / 2mm / 3mm / 5mm.
12A2/1 form-
Tapered pot-shaped superabrasives
DxWxXxH

| Dimensions | Type of binding | |||||||||
| D | W | X | H | T1 | E | Bakelite | Ceramics | Metal | Hybrid | Galvan |
| 75 | 3/4/5 | 2/3 | * | 18 | 8 | • | ||||
| 100 | 3/4/5 | 2/3/4 | * | 18 | 8 | • | ||||
| 125 | 3/4/5 | 2/3/4 | * | 19 | 9 | • | ||||
| 150 | 3/4/5 | 2/3/4 | * | 20 | 10 | • | ||||
| 175 | 4/5/6 | 2/3/4 | * | 20 | 10 | • | ||||
| 200 | 4/5/6 | 2/3/4 | * | 20 | 10 | • | ||||
* The parts marked with "*" are determined by individual requirements, prior consultation.
Standard abrasive layer thicknesses (X): 2mm / 3mm / 4mm.
12A2/20° shape-
Tapered pot-shaped superabrasives
DxWxXxH

| Dimensions | Type of binding | |||||||||
| D | W | X | H | T1 | E | Bakelite | Ceramics | Metal | Hybrid | Galvan |
| 50 | 3/4/5/10 | 2/3/4 | * | 7 | 5 | • | ||||
| 55 | 10 | 2/3/4 | * | 7 | 5 | • | ||||
| 63 | 3/5/10 | 2/3/4 | * | 9 | 6 | • | ||||
| 75 | 3/4/5/6/8/10/15 | 2/3/4/5 | * | 9 | 6 | • | ||||
| 90 | 3/4/5/6/8/10 | 2/3/4/5 | * | 10 | 6 | • | ||||
| 100 | 3/4/5/6/8/10/12,5/15/20 | 2/3/4/5 | * | 10 | 6 | • | ||||
| 100 | 6/8/10/12,5/15/20 | 4-6 | * | 10 | 8 | • | ||||
| 125 | 3/4/5/6/8/10/12,5/15/20 | 2/3/4/5/6 | * | 14 | 8 | • | ||||
| 125 | 6/8/10/12,5/15/20 | 4-6 | * | 14 | 10 | • | ||||
| 150 | 3/4/5/6/8/10/12,5/15/20/25 | 2/3/4/5/6 | * | 16 | 9 | • | ||||
| 150 | 6/8/10/12,5/15/20/25 | 4-8 | * | 16 | 9 | • | ||||
| 175 | 3/4/5/6/8/10/12,5/15/20/25 | 2/3/4/5/6 | * | 18 | 10 | • | ||||
| 175 | 6/8/10/12,5/15/20/25 | 5-10 | * | 18 | 10 | • | ||||
| 200 | 4/5/6/8/10/12/15/20/25 | 2/3/4/5/6 | * | 20 | 11 | • | ||||
| 200 | 6/8/10/12/15/20/25 | 6-12 | * | 20 | 11 | • | ||||
| 220 | 4/10/15/20 | 2/3/4/5/6 | * | 23 | 13 | • | ||||
| 220 | 10/15/20 | 6-15 | * | 23 | 13 | • | ||||
| 250 | 5/6/8/10/12/15/25 | 2/3/4/5/6 | * | 23 | 13 | • | ||||
| 250 | 8/10/12/15/25 | 5-10 | * | 23 | 13 | • | ||||
* The parts marked with "*" are determined by individual requirements, prior consultation.
Standard abrasive layer thicknesses (X): 2mm / 3mm / 4mm / 5mm / 6mm / 8mm / 10mm / 12mm / 15mm.
12A2/45° shape-
Tapered pot-shaped superabrasives
DxWxXxH

| Dimensions | Type of binding | |||||||||
| D | W | X | H | T1 | E | Bakelite | Ceramics | Metal | Hybrid | Galvan |
| 50 | 3/4/5/10 | 2/3/4 | * | 20 | 8 | • | ||||
| 55 | 3/4/5/10 | 2/3/4 | * | 20 | 8 | • | ||||
| 63 | 3/5/10 | 2/3/4 | * | 20 | 8 | • | ||||
| 75 | 3/4/5/6/8/10/15 | 2/3/4/5 | * | 20 | 10 | • | ||||
| 90 | 3/4/5/6/8/10 | 2/3/4/5 | * | 22 | 10 | • | ||||
| 100 | 3/4/5/6/8/10/12,5/15/20 | 2/3/4/5 | * | 22 | 10 | • | ||||
| 100 | 6/8/10/12,5/15/20 | 4-6 | * | 22 | 10 | • | ||||
| 100 | 6/8/10/12,5/15/20 | 4-6 | 25 | 22 | 10 | • | ||||
| 125 | 3/4/5/6/8/10/12,5/15/20 | 2/3/4/5/6 | * | 22 | 10 | • | ||||
| 125 | 6/8/10/12,5/15/20 | 4-6 | * | 22 | 10 | • | ||||
| 125 | 6/8/10/12,5/15/20 | 4-6 | 25 | 22 | 10 | • | ||||
| 150 | 3/4/5/6/8/10/12,5/15/20/25 | 2/3/4/5/6 | * | 22 | 10 | • | ||||
| 150 | 6/8/10/12,5/15/20/25 | 4-6 | * | 22 | 10 | • | ||||
| 150 | 6/8/10/12,5/15/20/25 | 4-6 | 25/40 | 22 | 10 | • | ||||
| 175 | 3/4/5/6/8/10/12,5/15/20/25 | 2/3/4/5/6 | * | 25 | 12 | • | ||||
| 175 | 6/8/10/12,5/15/20/25 | 5-10 | * | 25 | 12 | • | ||||
| 200 | 4/5/6/8/10/12/15/20/25 | 2/3/4/5/6 | * | 25 | 12 | • | ||||
| 200 | 6/8/10/12/15/20/25 | 6-12 | * | 25 | 12 | • | ||||
| 220 | 4/10/15/20 | 2/3/4/5/6 | * | 25 | 12 | • | ||||
| 220 | 10/15/20 | 6-15 | * | 25 | 12 | • | ||||
| 250 | 5/6/8/10/12/15/20/25 | 2/3/4/5/6 | * | 25 | 12 | • | ||||
| 250 | 8/10/12/15/20/25 | 6-15 | * | 25 | 12 | • | ||||
* The parts marked with "*" are determined by individual requirements, prior consultation.
Standard abrasive layer thicknesses (X): 2mm / 3mm / 4mm / 5mm / 6mm / 10mm / 12mm / 15mm.
Standard bore diameters (H): 25mm / 40mm.
Shape 12A9
Tapered pot-shaped superabrasives
DxWxXxH

| Dimensions | Type of binding | |||||||||
| D | W | X | H | T | E | Bakelite | Ceramics | Metal | Hybrid | Galvan |
| 50 | 3/5 | 2/3 | * | 10 | 8/7 | • | ||||
| 63 | 3/5 | 2/3 | * | 10 | 8/7 | • | ||||
| 75 | 6/10 | 2/3 | * | 10 | 8/7 | • | ||||
| 90 | 6/10 | 2/3 | * | 10 | 8/7 | • | ||||
| 100 | 6/10 | 2/3 | * | 10 | 8/7 | • | ||||
| 125 | 6/10 | 2/3 | * | 10 | 8/7 | • | ||||
| 150 | 6/10/12,5 | 2/3 | * | 12 | 10/9 | • | ||||
| 175 | 6/10/12,5 | 2/3 | * | 12 | 10/9 | • | ||||
| 200 | 6/10/12,5 | 2/3 | * | 12 | 10/9 | • | ||||
* The parts marked with "*" are determined by individual requirements, prior consultation.
Standard abrasive layer thicknesses (X): 2mm / 3mm.
12C9/20° shape-
Tapered pot-shaped superabrasives
DxWxX/UxH

| Dimensions | Type of binding | ||||||||||
| D | W | X | U | H | T1 | E | Bakelite | Ceramics | Metal | Hybrid | Galvan |
| 50 | 3/5 | 1 | 2 | * | 8 | 5 | • | ||||
| 75 | 6/8/10 | 2 | 4 | * | 8 | 5 | • | ||||
| 100 | 6/10/15 | 2/3 | 4/5 | * | 9 | 6 | • | ||||
| 125 | 6/10/15 | 2/3 | 4/5 | * | 13 | 8 | • | ||||
| 150 | 8/10/15 | 2/3 | 4/5 | * | 15 | 9 | • | ||||
* The parts marked with "*" are determined by individual requirements, prior consultation.
Standard widths (U): 2mm / 4mm / 5mm.
Standard abrasive layer thicknesses (X): 1mm / 2mm / 3mm.
12C9/45° shape-
Tapered pot-shaped superabrasives
DxWxX/UxH

| Dimensions | Type of binding | ||||||||||
| D | W | X | U | H | T1 | E | Bakelite | Ceramics | Metal | Hybrid | Galvan |
| 50 | 3/5 | 1 | 2 | * | 18 | 10 | • | ||||
| 75 | 6/8/10 | 2 | 4 | * | 22 | 10 | • | ||||
| 100 | 6/10/15 | 2/3 | 4/5 | * | 22 | 10 | • | ||||
| 125 | 6/10/15 | 2/3 | 4/5 | * | 22 | 10 | • | ||||
| 150 | 8/10/15 | 2/3 | 4/5 | * | 22 | 10 | • | ||||
* The parts marked with "*" are determined by individual requirements, prior consultation.
Standard widths (U): 2mm / 4mm / 5mm.
Standard abrasive layer thicknesses (X): 1mm / 2mm / 3mm.
Shape 12V2
Tapered pot-shaped superabrasives
DxWxXxH

| Dimensions | Type of binding | |||||||||
| D | W | X | H | T | E | Bakelite | Ceramics | Metal | Hybrid | Galvan |
| 50 | 5/10 | 2/3 | * | 15 | 8 | • | ||||
| 75 | 6/10 | 2/3 | * | 20 | 10 | • | ||||
| 90 | 6/10 | 2/3/4 | * | 23 | 10 | • | ||||
| 100 | 6/10 | 2/3/4 | * | 23 | 10 | • | ||||
| 125 | 6/10/12,5 | 2/3/4 | * | 23 | 10 | • | ||||
| 150 | 6/10/12,5 | 2/3/4 | * | 23 | 10 | • | ||||
* The parts marked with "*" are determined by individual requirements, prior consultation.
Standard abrasive layer thicknesses (X): 2mm / 3mm / 4mm.
12V5/V° shape-
Tapered pot-shaped superabrasives
DxWxXxH

| Dimensions | Type of binding | ||||||||||
| D | W | X | H | T | E | V | Bakelite | Ceramics | Metal | Hybrid | Galvan |
| 75 | 4/6 | 2/3 | * | 15 | 10 | 10/20 | • | ||||
| 100 | 6/10 | 2/3 | * | 18 | 10 | 10/20 | • | ||||
| 125 | 6/10 | 2/3 | * | 18 | 10 | 10/20 | • | ||||
| 150 | 6/10 | 2/3 | * | 20 | 12 | 10/20 | • | ||||
* The parts marked with "*" are determined by individual requirements, prior consultation.
Standard abrasive layer thicknesses (X): 2mm / 3mm.
Shape 12V9
Tapered pot-shaped superabrasives
DxXxUxH

| Dimensions | Type of binding | |||||||||
| D | X | U | H | T | E | Bakelite | Ceramics | Metal | Hybrid | Galvan |
| 75 | 2/3 | 6/10 | * | 20 | 10 | • | • | |||
| 100 | 2/3 | 6/10 | * | 20 | 10 | • | • | |||
| 125 | 2/3 | 6/10 | * | 25 | 10 | • | • | |||
* The parts marked with "*" are determined by individual requirements, prior consultation.
Standard widths (U): 6mm / 10mm.
Standard abrasive layer thicknesses (X): 2mm / 3mm.
12V9/25° shape-
Tapered pot-shaped superabrasives
DxXxUxH

| Dimensions | Type of binding | |||||||||
| D | X | U | H | T | E | Bakelite | Ceramics | Metal | Hybrid | Galvan |
| 100 | 3 | 2 | * | 12 | 10 | • | ||||
| 125 | 3 | 2 | * | 13 | 10 | • | ||||
| 150 | 3 | 3 | * | 16 | 10 | • | ||||
* The parts marked with "*" are determined by individual requirements, prior consultation.
Standard widths (U): 2mm / 3mm.
Standard abrasive layer thicknesses (X): 3mm.
15V9/Vz° alak-
Tapered pot-shaped superabrasives
DxXxUxH

| Dimensions | Type of binding | ||||||||||
| D | X | U | H | T1 | E | Vz° | Bakelite | Ceramics | Metal | Hybrid | Galvan |
| 75 | 2/3 | 6 | * | 13 | 6 | 45 | • | ||||
| 85 | 2/3 | 6 | * | 15 | 8 | 45 | • | ||||
| 100 | 2/3 | 6 | * | 20 | 11 | 30/45 | • | ||||
| 125 | 2/3 | 6 | * | 20 | 11 | 30/45 | • | ||||
| 150 | 2/3 | 6 | * | 20 | 11 | 30/45 | • | ||||
| 175 | 2/3 | 8 | * | 25 | 11 | 45 | • | ||||
| 200 | 2/3 | 6 | * | 25 | 11 | 45 | • | ||||
* The parts marked with "*" are determined by individual requirements, prior consultation.
Standard widths (U): 6mm / 8mm.
Standard abrasive layer thicknesses (X): 2mm / 3mm.
The cutting speed is possible between 20m/s and 80m/s, taking into account other properties of the tools.
The values in the table above are the recommended and typical dimensions of our manufacturing partners, deviation from them is possible in case of individual requirements.
For efficient machining of individual materials grades, ask our technology consultants or technical sales representatives for an offer.
